彭旭龙，副教授
一、教育背景：
2001-2005 中南大学，工程力学学士
2005-2010 中南大学，工程力学博士（博士导师：李显方教授）
2017-2021 新利luck在线·（中国）有限公司官网，土木工程博士后（合作导师：张建仁教授、唐雪松教授）
二、工作经历：
2010-2016 新利luck在线·（中国）有限公司官网，讲师
2016年11月至今 新利luck在线·（中国）有限公司官网，副教授
2019年9月至2020年9月 美国内布拉斯加大学，访问学者
三、研究方向：
功能梯度材料相关的静动力学问题分析
压电/磁电材料的断裂问题
近场动力学理论与应用。
四、主讲课程：
材料力学，结构力学，弹性力学，工程力学问题与分析方法（自然科学）
五、科研项目
1、湖南省自然科学青年基金项目，2016JJ3002，功能梯度材料对称结构的多场耦合问题研究，2016/01-2019/12，5万元，已结题，主持
2、国家自然科学基金青年基金项目，11202038，功能梯度材料对称结构的静动力学问题研究，2013/01-2015/12，24万元，已结题，主持
3、湖南省教育厅科学研究项目，13C1031，各向异性功能梯度材料的轴对称问题研究，2013-2015，1万元，已结题，主持
4、国家自然科学基金项目，11172051，具脱层层合结构的非线性动力学建模、理论分析与实验研究，2012/01-2015/12，已结题，参加
5、国家自然科学基金项目，11102028，湿热条件下具脱层压电层合结构的非线性动力特性及脱层扩展研究，2012-2014，已结题，参加
6、国家自然科学基金项目，51108047，基于桥梁响应的车辆轴重识别方法研究，2012-2014，已结题，参加
7、新利luck在线·（中国）有限公司官网桥梁与隧道工程创新项目，11CA10，各向异性功能梯度材料的多场耦合力学问题研究，2010-2012，已结题，主持
8、中南大学首批优秀博士学位论文扶植项目，2008yb023，功能梯度材料相关的几个动静态问题分析及结构优化，2009-2010，已结题，主持
9、国家自然科学基金项目，10672189，T应力及其对裂纹扩展路径的影响，2007-2009，已结题，参加
六、专著章节
1、Xian-fang Li*, Xu-long Peng. Chapter 7: Cylindrically- or spherically-symmetric problems of functionally graded materials. In: Nathan J. Reynolds (Editor), Functionally Graded Materials, New York: Nova Science Publishers, Inc. 2011, pp. 1-56. (ISBN 978-1-61209-616-2)
七、期刊论文
[1] Li Zhang, Haiping Huang, Bing Zhao, Xulong Peng*. Effect of gradient on the deflection of functionally graded rectangular microcantilever induced by surface stress. Materials Today Communications, 2020, 25, 101598.
[2] Xulong Peng, Li Zhang, Zi-Xuan Yang, Zhan-Yong Feng, Bing Zhao, Xian-Fang Li. Effect of gradient on the deflection of functionally graded microcantilever beams with surface stress. Acta Mechanica, 2020, 231, 4185-4195.
[3] Bing Zhao, Tao Liu, Jian Chen, Xulong Peng, Zhanping Song. A new Bernoulli–Euler beam model based on modified gradient elasticity. Archive of Applied Mechanics, 2019, 89, 277-289.
[4] Peng Xu-long, Han De-qian, Cao si-qi, Yang Jian-qiang. Thermal stresses of polar orthotropic FGM hollow sphere with arbitrary gradient. Journal of Changsha University of Science and Technology (Natural Science), 2017, 14(4): 55-61. (In Chinese).
[5] Zhao Bing, Liu Tao, Pan Jun, Peng Xulong, Tang xuesong. A stress analytical solution for Mode III crack within modified gradient elasticity. Mechanics Research Comminications, 2017, 84: 142-147.
[6] Wencong Shi, Z.-B. Shen, X.-L. Peng, X.-F. Li. Frequency equation and resonant frenquency of free-free Timoshenko beams with unequal end masses. International Journal of Mechanical Sciences, 2016, 115-116: 406-415.
[7]Wang Yayun, Chen Deliang, Peng Xulong, Zhou Lu. The differential quadrature method for dynamic buckling of ftraight beam under elastic compression wave. Natural Science Journal of Xiangtan University, 2016, 38(3): 30-34. (In Chinese).
[8] X.-L. Peng, X.-F. Li, G.-J. Tang, Z.-B. Shen. Effect of scale parameter on the deflection of a nonlocal beam and application on energy release rate of a crack. Zeitschrift für angewandte Mathematik und Mechanik (ZAMM), 2015, 95(12): 1428-1438.
[9]X.S. Tang, X.L. Peng. An energy density zone model for fatigue life prediction accounting for non-equilibrium and non-homogeneity effects, Theoretical and Applied Fracture Mechanics, 2015, 79: 105-112.
[10] Yayun Wang, Xulong Peng, Deliang Chen. Free vibration of axially functionally graded beams with non-uniform cross-section. Chinese Journal of Solid Mechanics, 2015, 36(5): 105-112. (In Chinese).
[11] Peng Xu-long, Yang Jian-qiang. Elastic analysis of functionally graded polar orthotropic sandwich circular ring. Journal of Changsha University of Science and Technology(Natural Science), 2015, 12(4): 50-55. (In Chinese).
[12]Yang Wu, Peng Xu-long, Li Xian-fang. Natural frequencies of longitudinal vibration of cone-shaped nanotubes. Journal of Vibration and Shock, 2014, 33(2): 158-162. (In Chinese).
[13] Yang Jin Hua, Chen De Liang, Peng Xu Long. Delamination buckling of piezoelectric laminated cylindrical shell under axial compression, 3rd International Conference on Advanced Engineering Materials and Technology, AEMT 2013, 2013/5/11-2013/5/12: 1207-1211, Zhangjiajie, China, 2013.
[14] X. L. Peng, X. F. Li. Effects of gradient on stress distribution in rotating functionally graded solid disks. Journal of Mechanical Science and Technology, 2012, 26(5): 1483-1492.
[15] X. L. Peng, X. F. Li. Elastic analysis of rotating functionally graded polar orthotropic disks. International Journal of Mechanical Sciences, 2012, 60(1): 84-91.
[16] Xu-Long Peng, Xian-Fang Li. Thermal stress in rotating functionally graded hollow circular disk. Composite Structures, 2010, 92(8): 1896-1904.
[17] X. L. Peng, X. F. Li. Thermoelastic analysis of a cylindrical vessel of functionally graded material. International Journal of Pressure Vessels and Piping, 2010, 87(5): 203-210.
[18] Xu-long PENG, Xian-fang Li. Transient response of temperature and thermal stresses in a functionally graded hollow cylinder. Journal of Thermal stresses, 2010, 33(5): 485-500.
[19] Xian-Fang Li, Xu-Long Peng, Kang Yong Lee. The static response of functionally graded radially polarized piezoelectric spherical shells as sensors and actuators. Smart Materials and Structures,2010, 19(3): 035010.
[20] X. F. Li, X. L. Peng, Kang Yong Lee. Radially polarized functionally graded piezoelectric hollow cylinders as sensors and actuators. European Journal of Mechanics - A/Solids, 2010，29(4): 704-713.
[21] Li X F, Tang B Q, Peng X L, Huang Y. Influence of elastic T-stress on the growth direction of two parallel cracks. Structural Engineering and Mechanics, 2010，34(3): 377-390.
[22] Xu-Long Peng, Xian-Fang Li, Kang Yong Lee. Interface crack problem of functionally graded piezoelectric materials: effects of the position of electromechanical impact and gradient. Acta Mechanica, 2009, 207: 69-82.
[23] Xu-Long Peng, Xian-Fang Li. Transient response of the crack-tip field in a magnetoelcectroelastic half-space with a functionally graded coating under impacts. Archive of Applied Mechanics, 2009, 79: 1099-1113.
[24] Xu-long PENG, Xian-fang Li. Thermoelastic analysis of functionally graded annulus with arbitrary gradient. Applied Mathematics and Mechanics (English Edition), 2009, 30(10): 1211-1220.
[25] Xu-long PENG, Xian-fang Li. Thermoelastic analysis of functionally graded annulus with arbitrary gradient. Applied Mathematics and Mechanics, 2009, 30(10): 1135-1142. (In Chinese).
[26] Xian-Fang Li, Xu-Long Peng. A pressurized functionally graded hollow cylinder with arbitrarily varying material properties. Journal of Elasticity, 2009, 96: 81-95.
[27] Xian-Fang Li, Xu-Long Peng, Ying-An Kang. Pressurized hollow spherical vessels with arbitrary radial nonhomogeneity. AIAA Journal, 2009, 47: 2262-2265.
[28] Xian-Fang Li, Xu-Long Peng. Theoretical analysis of surface stress for a microcantilever with varying widths. Journal of Physics D-Applied Physics, 2008, 41: 1-10.
八、会议论文
[1] Peng Xulong*, Yang Jinhua. Thermal stresses in rotating functionally graded polar Thermal stresses in rotating functionally graded polar orthotropic hollow disks with power-law varying properties, 4th International Conference on Materials Engineering for Advanced Technologies (ICMEAT), 2015/6/27-2015/6/28: 306-309, London.
九、荣誉奖励
[1] 彭旭龙(4/4)，《复杂状态下复合材料及其结构的非线性静、动力行为研究》，湖南省人民政府，湖南省自然科学奖，三等奖，2011
(陈得良，戴宏亮，杨金花，彭旭龙)
[2] 彭旭龙，《功能梯度材料相关的几个动静态问题分析及结构优化》，湖南省人民政府学术委员会，湖南省优秀博士学位论文，2012
[3] 彭旭龙, 《功能梯度材料相关的几个动静态问题分析及结构优化》. 2011年中南大学优秀博士学位论文.
欢迎有力学、数学或材料知识背景且有志于从事科学研究的学生报考研究生。
电子邮件：Email: peng_xulong@csust.edu.cn
