|
|
|
序号 |
作者姓名 |
论文题目 |
学科门类编号 |
发表年 |
刊物名称 |
论文等级 |
备注 |
1 |
ZhiqiangLiu(刘志强) |
Research on an Improved Sliding Mode Observer for Speed Estimation in Permanent Magnet Synchronous Motor |
2 |
2022 |
processes |
7 |
|
2 |
陈耿彪 |
Effects of Mo Content on the Microstructure and Mechanical Properties of TiNbZrMox High-Entropy Alloys |
2 |
2022 |
Journal of Alloys and Compounds |
7 |
|
3 |
陈小敏 |
High-temperature deformation characteristics and constitutive models of Inconel 625 superalloy |
2 |
2022 |
Materials Today Communications |
7 |
|
4 |
邓桦坤 |
AA5052 failure prediction of electromagnetic flanging process using a combined fracture model |
2 |
2022 |
Archives of Civil and Mechanical Engineering |
7 |
|
5 |
杜荣华 |
交通环境能量采集及自供能交通设施健康状态监测研究进展 |
2 |
2022 |
仪器仪表学报 |
A2 |
|
6 |
高凯 |
基于多头注意力的 CNN-LSTM 的换道意图预测 |
2 |
2022 |
机械工程学报 |
2-A2 |
|
7 |
高凯 |
Instantaneous Lane-Changing Type Aware Lane Change Prediction Based on LSTM in Mixed Traffic Scenario |
2 |
2022 |
Journal of Circuits, Systems and Computers |
7 |
|
8 |
高凯 |
False Data Injection Attack Detection in a Platoon of CACC in RSU |
2 |
2022 |
TrustCom 2022（CCF-C） |
7 |
|
9 |
高凯（导师） |
An Adaptive Tracking-Extended Kalman Filter for SOC Estimation of Batteries with Model Uncertainty andSensor Error |
2 |
2022 |
Energies |
7 |
|
10 |
高凯（导师） |
Forgery Trajectory Injection Attack Detection for Traffic Lights under Connected Vehicle
Environment |
2 |
2022 |
TrustCom 2022（CCF-C） |
7 |
|
11 |
贺尚红 |
机械产品设计中基于多模型集成的二次开发
技术研究 |
2 |
2022 |
现代制造工程 |
|
|
12 |
贺湘宇（研究生第一） |
Design and energy analysis of novel hydraulic regenerative potential energy systems |
2 |
2022 |
Energy |
7 |
|
13 |
胡波(导师) |
微小型减速器离合保护结构设计与试验 |
2 |
2022 |
机械传动 |
6 |
|
14 |
胡宏伟 |
Ultrasonic Characterization Method of Carbon Nanotubes
Orientation Using Sparse Representation |
2 |
2022 |
Russian Journal of Nondestructive Testing |
7 |
|
15 |
胡宏伟（导师) |
Ultrasonic phased array phase shift migration imaging of irregular surface components using attenuation compensation and anti-aliasing technique |
2 |
2022 |
NDT&E International |
7 |
|
16 |
胡林 |
Investigation on AEB Key Parameters for Improving Car to Two-Wheeler Collision Safety Using In-Depth Traffic Accident Data |
2 |
2022 |
IEEE Transactions on Vehicular Technology |
7 |
|
17 |
胡林 |
Injury severity analysis of electric bike crashes in Changsha, Hunan Province: taking different lighting conditions into consideration |
2 |
2022 |
Transportation Safety and Environment |
7 |
|
18 |
胡林 |
The Real-World Effects of Route Familiarity on Drivers' Eye Fixations at Urban Intersections in Changsha, China |
2 |
2022 |
International Journal of Environmental Research and Public
Health |
7 |
|
19 |
胡林 |
A study on energy distribution strategy of electric vehicle hybrid energy storage system considering driving style based on real urban driving data |
2 |
2022 |
Renewable and Sustainable Energy Reviews |
7 |
|
20 |
胡林 |
Performance evaluation strategy for battery pack of electric vehicles: Online estimation and offline evaluation |
2 |
2022 |
Energy Reports |
7 |
|
21 |
胡林 |
Investigating the severity of non-urban road traffic accidents in typical regions of Sichuan and Guizhou, China |
2 |
2022 |
Traffic Injury Prevention |
7 |
|
22 |
胡林 |
电动汽车锂离子电池-超级电容混合储能系统能量分配与参数匹配研究综述 |
2 |
2022 |
机械工程学报 |
2-A2 |
|
23 |
胡永乐 |
Multi-Objective Optimization of Process Parameters in Laser Cladding CoCrCuFeNi High-Entropy Alloy Coating |
2 |
2022 |
Journal of Thermal Spray Technology |
7 |
|
24 |
胡永乐 |
On the enhanced wear resistance of laser-clad CoCrCuFeNiTix high-entropy alloy coatings at elevated temperature |
2 |
2022 |
Tribology International |
7 |
|
25 |
黄龙 |
Design and kinematic analysis of a rigid-origami-based underwater sampler with deploying-encircling motion |
2 |
2022 |
Mechanism and Machine Theory |
7 |
|
26 |
黄龙 |
Equilibrium Conformation of a Novel Cable-Driven Snake-Arm Robot under External Loads |
2 |
2022 |
Micromachines |
7 |
|
27 |
黄龙 |
Design of an origami-based cylindrical deployable mechanism |
2 |
2022 |
Mechanical Sciences |
7 |
|
28 |
黄龙(导师) |
Design and analysis of a tendon-driven snake-arm robot based on a spherical magnets |
2 |
2022 |
Transactions of the Canadian Society for Mechanical Engineering |
7 |
|
29 |
黄龙(导师) |
丝驱动蛇形臂机器人的被动柔顺特性分析 |
2 |
2022 |
机械科学与技术 |
5 |
|
30 |
黄龙(导师) |
An Origami-Inspired Quasi-zero Stiffness Structure for Low-Frequency Vibration Isolation |
2 |
2022 |
Journal of Vibration Engineering and Technologies |
7 |
|
31 |
蒋仁言 |
两类高度截尾数据及其参数估计问题 |
2 |
2022 |
机械工程学报 |
2-A2 |
|
32 |
蒋仁言(导师)，熊彬彬 |
基于等效加工时间模型的机床退化过程建模 |
2 |
2022 |
吉林大学学报(工学版) |
2-A2 |
|
33 |
雷正保（导师） |
Multi-objective optimization design of postsoil
system for enhanced W-beam guardrail
containment performance |
2 |
2022 |
International Journal of Crashworthiness |
7 |
|
34 |
雷正保（导师） |
A bounded randomly variable shape multi-quadric interpolation method in dual reciprocity boundary element method |
2 |
2022 |
Engineering Analysis with Boundary Elements |
7 |
|
35 |
雷正保（导师） |
抗撞结构桩基承载能力的撞击头部设计方法 |
2 |
2021 |
振动与冲击 |
5 |
|
36 |
雷正保（导师） |
基于护栏性能指标的集成式人工智能模型研究 |
2 |
2022 |
湖南文理学院学报(自然科学版) |
7 |
|
37 |
雷正保（导师） |
立柱埋深检测修正方法及埋深检测仪器研制 |
2 |
2022 |
武汉理工大学学报 |
6 |
|
38 |
李奇奇 |
Morning
glory-inspired lattice structure with negative Poisson's ratio effect |
2 |
2022 |
International Journal
of Mechanical Sciences |
7 |
|
39 |
李奇奇 |
Parametric Analyses on Axial Compression Performance of Bio-inspired Porous Lattice structures |
2 |
2022 |
Thin-Walled Structures |
7 |
|
40 |
李奇奇 |
Axial compression performance of a bamboo-inspired porous lattice structure |
2 |
2022 |
Thin-Walled Structures |
7 |
|
41 |
李奇奇 |
Bionic polycellular
structures for axial compression |
2 |
2022 |
International Journal
of Mechanical Sciences |
7 |
|
42 |
李奇奇 |
Axial crashworthiness and multi-objective optimization of single-hat beams with sinusoidal cross-sections |
2 |
2022 |
Structural and Multidisciplinary Optimization |
7 |
|
43 |
李奇奇 |
Mitigation of impact force through optimisation of three-phase locally resonant structures |
2 |
2022 |
International Journal
of Mechanical Sciences |
7 |
|
44 |
李岳林 |
负气门重叠对掺氢天然气HCCI发动机燃烧特性的影响研究 |
2 |
2022 |
机械科学与技术 |
5 |
|
45 |
廖家才 |
Dandelion segmentation with background transfer learning and RGB-attention module |
2 |
2022 |
Computers and Electronics in Agriculture |
7 |
|
46 |
刘鑫 |
An efficient multi-objective reliability-based design optimization method for structure based on probability and interval hybrid model |
2 |
2022 |
Computer Methods in Applied Mechanics and Engineering |
7 |
|
47 |
刘鑫 |
An improved first order approximate reliability analysis method for uncertain structures based on evidence theory |
2 |
2022 |
Mechanics Based Design of Structures and Machines，
An International Journal |
7 |
|
48 |
刘鑫 |
The multi-objective reliability-based design optimization of buffering characteristics of airbag seat in manned airdrop |
2 |
2022 |
International Journal of Crashworthiness |
7 |
|
49 |
刘鑫 |
基于概率-概率盒混合模型的气囊座椅防护特性可靠性分析方法 |
2 |
2022 |
机械工程学报 |
2 |
|
50 |
刘鑫 |
基于混合模型汽车结构耐撞性的可靠性优化设计 |
2 |
2021 |
新利luck在线·（中国）有限公司官网学报 |
6 |
2021年漏报 |
51 |
刘鑫 |
An Efficient Multi-objective Optimization Method Based on the Adaptive Approximation Model |
2 |
2022 |
the 2021 International Conference of Mechanical Design & the 21th Mechanical Design Annual Conference (ICMD2021) |
7 |
|
52 |
龙春光（导师） |
载荷和转速对HDPE多元复合材料摩擦学性能的影响 |
2 |
2022 |
润滑与密封 |
6 |
|
53 |
龙春光（导师） |
PE⁃UHMW/海泡石纤维复合材料的力学性能与摩擦学性能研究 |
2 |
2022 |
中国塑料 |
5 |
|
54 |
卢先正 |
Tunable mechanical and degradation properties of biodegradable Mg-Y-Zn alloys via Zn content regulation |
2 |
2022 |
Journal of Materials Research and Technology |
7 |
|
55 |
吕铎 |
Ultrasonic C-scan image restoration method using the Richardson-Lucy algorithm and a flaw measurement model |
2 |
2022 |
Applied Acoustics |
7 |
|
56 |
毛聪 |
Simulation and experiment of electroplated grinding wheel with orderly-micro-grooves |
2 |
2022 |
Journal of Manufacturing Processes |
7 |
|
57 |
毛聪 |
Tensile behaviors of laser-discrete-quenched substrate/nickel coating of electroplated grinding wheel |
2 |
2022 |
International Journal of Precision Engineering and Manufacturing-Green Technology |
7 |
|
58 |
苗秀娟 |
Effect of low operating temperature on the aerodynamiccharacteristics of a high-speed train |
2 |
2022 |
Journal of Zhejiang University-SCIENCE A |
7 |
|
59 |
荣见华（研究生第一） |
考虑屈曲约束的无铰链多输入多输出柔性机构拓扑优化设计方法 |
2 |
2022 |
机械强度 |
5 |
|
60 |
唐昆 |
小口径双非球面硫系玻璃镜片精密热压成形模具制造 |
2 |
2022 |
中国机械工程 |
3 |
|
61 |
仝永刚 |
Microstructure and properties of CoCrNiFeMnAl0.5 high-entropy alloys prepared by gas atomization combined with oscillatory pressure sintering |
2 |
2022 |
Intermetallics |
7 |
|
62 |
仝永刚 |
TiC strengthened CoCrNi medium entropy alloy: Dissolution and precipitation of TiC and its effect on microstructure and performance |
2 |
2022 |
Transactions of Nonferrous Metals Society of China |
7 |
|
63 |
仝永刚 |
Damage behavior and mechanism of C/C-SiC composite ablated under different environments |
2 |
2022 |
Advanced Composites and Hybrid Materials |
7 |
|
64 |
仝永刚 |
Tough and wear-resistant carbon fiber reinforced TiC-based composite prepared by alloyed melt infiltration at low temperatures |
2 |
2022 |
Ceramics
International |
7 |
|
65 |
仝永刚 |
Effect of Ti–Cu alloy's composition on microstructure and performance of carbon fiber reinforced TiC-based composites prepared by alloyed reactive melt infiltration |
2 |
2022 |
Ceramics
International |
7 |
|
66 |
仝永刚 |
Real-time atomic deformation behavior of nano CoCrCuFeNi high-entropy alloy |
2 |
2022 |
Transactions of Nonferrous Metals Society of China |
7 |
|
67 |
仝永刚（研究生第一） |
Effect of Tantalum content on microstructure and mechanical properties of CoCrNiTax medium entropy alloys |
2 |
2022 |
Materials Science & Engineering A |
7 |
|
68 |
仝永刚（研究生第一） |
Outstanding yield strength of CoCrNiTa0.1 medium entropy alloy under the synergistic regulated with nanoprecipitation and grain refining |
2 |
2022 |
Journal
of Alloys and Compounds |
7 |
|
69 |
仝永刚（研究生第一） |
分子动力学方法在高熵合金研究中的应用现状与展望 |
2 |
2022 |
中国有色金属学报 |
3-A3 |
* |
70 |
仝永刚（研究生第一） |
Microstructure and Performance of Fe50Mn30Cr10Ni10 High-Entropy Alloy Produced by High-Efficiency and Low-Cost Wire Arc Additive Manufacturing |
2 |
2022 |
Lubricants |
7 |
|
71 |
王方 |
Numerical investigation of the rider's head injury in typical single-electric self-balancing scooter accident scenarios |
2 |
2022 |
Journal of The Royal Society Interface |
7 |
|
72 |
王方 |
Should anthropometric differences between the commonly used pedestrian computational biomechanics models and Chinese population be taken into account when predicting pedestrian head kinematics and injury in vehicle collisions in China? |
2 |
2022 |
Accident Analysis and Prevention |
7 |
|
73 |
王方 |
Evaluation of the Head Protection Effectiveness of Cyclist Helmets Using Full-Scale Computational Biomechanics Modelling of Cycling Accidents |
2 |
2022 |
Journal of Safety Research |
7 |
|
74 |
王开明 |
Research and progress of laser cladding: Process, materials and applications |
2 |
2022 |
Coatings |
7 |
|
75 |
王向红 |
Effect of Pore Morphology of Composites on Ultrasonic
Attenuation Coefficient Based on Fractal Theory |
2 |
2022 |
Russian Journal of Nondestructive Testing |
7 |
|
76 |
王向红 |
Three-point bending properties of 3D_C/C_TiC_Cu composites
based on acoustic emission technology |
2 |
2022 |
Mechanical Systems and Signal Processing |
7 |
|
77 |
王向红 |
Simulation and experimental research on nonlinear ultrasonic testing of composite material porosity |
2 |
2022 |
Applied Acoustics |
7 |
|
78 |
吴钢 |
Research on Performance Optimization of Liquid Cooling and Composite Phase Change Material Coupling Cooling Thermal Management System for Vehicle Power Battery |
2 |
2022 |
Journal of Renewable Materials |
7 |
|
79 |
吴钢 |
A skeletal mechanism for biodiesel-dimethyl ether combustion in engines |
2 |
2022 |
Fuel |
7 |
|
80 |
吴钢（导师） |
铈基和镧基复合氧化物催化剂催化碳烟燃烧性能研究 |
2 |
2022 |
西华大学学报(自然科学版) |
7 |
|
81 |
武和全 |
侧面碰撞远端老年乘员损伤研究 |
2 |
2022 |
汽车技术 |
5 |
|
82 |
武和全 |
Research on Neck Response of Elderly Drivers in Rear Collision |
2 |
2022 |
Biomed Research International |
7 |
|
83 |
徐晓强 |
Mobile device-based bearing diagnostics with varying speeds |
2 |
2022 |
Measurement |
7 |
|
84 |
严一雄 |
Dynamic Induction Heating Temperature Field Analysis of Spiral Bevel Gears |
2 |
2022 |
APPLIED SCIENCES-BASEL |
7 |
|
85 |
严一雄 |
Helical displacement Talbot lithography for duty cycles
of periodic patterning |
2 |
2022 |
Journal of Optics |
7 |
|
86 |
易可夫 |
An Improved YOLOX model and Domain Transfer Strategy for Nighttime Pedestrian and Vehicle Detection |
2 |
2022 |
APPLIED SCIENCES-BASEL |
7 |
|
87 |
余小峰（导师） |
分散相形态对MWCNTs/PBT/HDPE共混物摩擦磨损性能的影响 |
2 |
2022 |
润滑与密封 |
6 |
|
88 |
张健 |
Hydrogen storage properties of magnesium hydride catalyzed by Ni-based solid solutions |
2 |
2022 |
Transactions of Nonferrous Metals Society of China |
7 |
|
89 |
张健 |
钎焊金刚石工具失效机理及其抑制策略研究进展 |
2 |
2022 |
材料导报 |
7 |
|
90 |
张健（导师） |
Investigation on hydrogen storage properties of as-cast, extruded and swaged Mg-Y-Zn alloys |
2 |
2022 |
International Journal of Hydrogen Energy |
7 |
|
91 |
张健（导师） |
Laser in-situ preparation and mechanical properties of VC reinforced Fe-based wear-resistant composite cladding |
2 |
2022 |
Ceramics International |
7 |
|
92 |
张健（导师） |
Cu-induced enhancement of interfacial bonding for brazed diamond grits with Ni-Cr filler alloys |
2 |
2022 |
International Journal of Refractory Metals and Hard Materials |
7 |
|
93 |
张健（导师） |
Effect of CeSi2 addition on microstructures of brazed layers and interfacial characteristics of brazed diamonds with Ni-Cr filler alloy |
2 |
2022 |
Diamond and Related Materials |
7 |
|
94 |
张健（导师） |
A comparative study on hydrogen storage properties of as-cast and extruded Mg-4.7Y-4.1Nd-0.5Zr alloys |
2 |
2022 |
Journal of Physics and Chemistry of Solids |
7 |
|
95 |
张健（导师） |
Microstructures and hydrogen storage properties of Mg-Y-Zn rare earth magnesium alloys with different Zn content: Experimental and first-principles studies |
2 |
2022 |
Materials Today Communications |
7 |
|
96 |
张健（导师） |
First-principles calculations on brazed diamond with FeCoCrNi high entropy alloys doped with strong carbide-forming elements |
2 |
2022 |
Solid State Communications |
7 |
|
97 |
张明军 |
Impact of power modulation on weld appearance and
mechanical properties during laser welding of AZ31B magnesium alloy |
2 |
2022 |
Optics
& Laser Technology |
7 |
|
98 |
张明军 |
AZ31B镁合金可调环形光纤激光焊接试验研究 |
2 |
2022 |
中国激光 |
7 |
|
99 |
张明军 |
纳秒脉冲激光清洗对AZ31B镁合金激光焊接质量的影响 |
2 |
2022 |
汽车工程 |
2-A2 |
|
100 |
张明军 |
Impact of ultrasonic vibration on microstructure and mechanical properties of diamond in laser brazing with Ni–Cr filler alloy |
2 |
2022 |
Ceramics International |
7 |
|
101 |
张明军 |
Microstructure and properties at bonds of diamond grains and NiCr filler alloy by fiber laser brazing |
2 |
2022 |
Diamond and Related
Materials |
7 |
|
102 |
张明军（研究生第一） |
Active laser brazing of diamond onto 45 steel: Diamond flow behavior, microstructure and bonding strength |
2 |
2022 |
Diamond and Related
Materials |
7 |
|
103 |
张旭 |
Numerical simulation and experimental study on electromagnetic
punching-flanging process of 6061 aluminum alloy sheets |
2 |
2022 |
Journal of Manufacturing Processes |
7 |
|
104 |
周小杰 |
Effect of LPSO orientation on the compression behavior and workability of the Mg-5Gd-3Y–1Zn-0.5Zr alloy |
2 |
2022 |
Materials Science and Engineering: A |
7 |
|
105 |
周小杰(导师) |
Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall–Petch relation |
2 |
2022 |
Journal of Magnesium and Alloys |
7 |
|
106 |
周小杰(导师) |
Tensile behavior at various temperatures of the Mg-Gd-Y-Zn-Zr alloys with different initial morphologies of LPSO phases prior to extrusion |
2 |
2022 |
Materials Science and Engineering: A |
7 |
|
107 |
周小杰(导师) |
Hot Compression Behavior and Workability of Mg-5Gd-3Y-2Zn-0.5Zr Alloy with Long-Period Stacking Ordered Phases |
2 |
2022 |
Journal of Materials Engineering and Performance |
7 |
|
108 |
周振华（研究生第一） |
压电执行器改进Bouc-Wen模型及其定位补偿控制研究 |
2 |
2022 |
振动与冲击 |
3-A3 |
|
109 |
周振华（研究生第一） |
压电执行器的非对称动态迟滞特性建模研究 |
2 |
2022 |
仪器仪表学报 |
2-A2 |
|
110 |
邹铁方（导师） |
真实事故中通过制动控制降低人地碰撞损伤的潜在效益及时空约束 |
2 |
2021 |
机械工程学报 |
2 |
|
111 |
邹铁方（导师） |
自行车座高对骑车人脊背前倾角和头部损伤的影响 |
2 |
2022 |
汽车安全与节能学报 |
5 |
|
112 |
邹铁方（导师） |
耦合气囊及制动控制对人地碰撞损伤的防护及效果评估 |
2 |
2022 |
汽车安全与节能学报 |
5 |
|
113 |
邹铁方（导师） |
A method for analyzing accident reconstruction results under complex uncertain conditions |
2 |
2022 |
INTERNATIONAL JOURNAL OF CRASHWORTHINESS |
7 |
|
114 |
邹铁方（导师） |
Methods for fusing uncertain results obtained from different models in accident reconstruction |
2 |
2022 |
Forensic Sciences Research |
5-B3 |
|
115 |
邹铁方（导师） |
基于车辆运动控制的人地碰撞损伤防护新技术接受度研究 |
2 |
2022 |
铁道科学与工程学报 |
7 |
|
116 |
陈耿彪 |
《液压传动》研讨式教学实践研究 |
人文社科类 |
2021 |
高等教育研究 |
|
|
117 |
胡波 |
融合真实与虚拟实验的液压传动实验教学与实践 |
人文社科类 |
2022 |
现代信息科技 |
|
|
118 |
邹铁方 |
复杂多形态耦合碰撞事故分步仿真 |
人文社科类 |
2022 |
实验技术与管理 |
|
|
119 |
王方 |
智能汽车新工科人才培养实践教学体系探索 |
人文社科类 |
2022 |
时代汽车 |
|
|
120 |
王方 |
新时期背景下的汽车设计课程设计教学改革 |
人文社科类 |
2022 |
时代汽车 |
|
|
121 |
陈小敏 |
《机械设计基础》课程思政改革探索 |
人文社科类 |
2022 |
教育前沿 |
|
|
122 |
李奇奇 |
新四化牵引的汽车类专业培养体系升级改造初探 |
人文社科类 |
2022 |
时代汽车 |
|
|
